Pad Jacks (Hydraulic) available for Hire

Hydraulic pad jacks with a very compact design for use within very low height spaces, all jacks are manufactured with a spring-return, for ease plunger return. We offer seven different models ranging from 10 to 90 tons capacity.

Pad Jacks Selection Chart

MODEL NUMBER	Capacity (tons)	Max. Stoke (mm)	Closed Height (mm) - H	External Dia (mm) D2	Plunger Dia  (mm)  D1	Across Flats  (mm)  W	Litres	WEIGHT (Kgs)	Data Sheet
PJ05-06	5	6	32	61	25	41	0.01	0.6
PJ05-16	5	16	43	60	25	40	0.01	1.3
PJ10-11	10	11	43	84	38	56	0.02	1.5
PJ20-11	22	11	51	102	51	76	0.03	2.7
PJ30-13	30	13	59	117	64	97	0.06	4.4
PJ45-16	50	16	67	140	70	114	0.11	6.7
PJ75-16	75	16	80	165	90	140	0.17	11.5
PJ90-16	90	16	86	177	90	152	0.21	14.3
PJ145-16	145	16	100	215	118	190	0.32	24.2

Fixing Details

MODEL NUMBER	PJ05-06	PJ05-16	PJ10-11	PJ20-11	PJ30-13	PJ45-16	PJ75-16	PJ90-16	PJ145-16
Hole Size (mm)	5	5	7	10	10	11	13	13	13
Counter Bore (mm)	8	8	11	15	16	19	21	21	21
Centres (mm) - E	28	28	37	49	52	67	76	76.0	117.0

The hydraulic pad jacks body has two mounting holes which enables fixing to machinery such as, fixtures, clamping jigs, spreader plates, etc., the plungers load contact area is also grooved to increase its horizontal grip, and we recommend that you use a thin plywood packer between the plunger and load contact area. The jack should only be operated between parallel surfaces, if this is not the case then use a steel tapered shim which must cover the full plunger area or install and level a steel plate bedded on a high strength mortar or grout.